Drying and Dehumidifying

SCAD Compressed air dryer
SCAD Compressed air dryer

SCAD compressed air dryer integrates plastic drying and conveying into one unit, which is especially applicable to vertical injection moulding machine and stand injection moulding machine when limited by height of the workshop. The SCAD adopts positive compressed air to load material so it has low noise level and low energy consumption. Euro design features classy appearance and easy for maintenance. The hot and dry air is formed by sending outfitted compressed air into pipe heaters. Unique up-blowing air pipe design makes hot air evenly spread out to achieve best drying effect.

Meet Shini auxiliary equipment - SCAD

Enquire

Standard Hopper Dryer SHD
Standard Hopper Dryer SHD

SHD series “Standard” hopper dryers offer an effective and low-cost method for plastic material drying. Hot air is used to dry wet materials that due to moisture absorption during packaging, transportation, and recycling cycles. They can be directly mounted on the moulding machine for quick drying and space saving.

Standard Hopper Dryer SHD
Meet Shini auxiliary equipment - SHD

Enquire

Hopper Dryer SHD-U
Hopper Dryer SHD-U

SHD-U series hopper dryers adopt hot air down-blowing design and use stainless steel made material hoppers to avoid contamination. With this design, they are also ideally suitable for use with honeycomb dehumidifiers to dry engineering plastics. There are 25 models available, ranging from 20 to 8000 liters.

Hopper Dryer SHD-U
Meet Shini auxiliary equipment - SHD-U.pdf

Enquire

Drying Loader SDL-U
Drying Loader SDL-U

SDL-U series of drying loaders combine conventional hot air drying and two-stage conveying functions into a compact unit. It is particularly suitable for using with the big tonnage moulding machines when height restriction is concerned at the workshop. The SDL-U series has a unique function of two-stage conveyingf that can transport both raw material to its own drying hopper and dried material to the moulding machine.

Drying Loader SDL-U

Enquire

Cabinet Dryers CD
Cabinet Dryers CD

For cabinet dryers, materials to be dried are placed on the stainless steel made moveable material trays. During operation, process air will flow to heating wire and be heated up to required temperature, then flow through a manifold with evenly scattered holes. Moisture air is sent out through air exhaust port. It is designed to achieve an even drying effect.

Cabinet Dryers CD
Meet Shini auxiliary equipment

Enquire

Honeycomb Dehumidifier SD-H
Honeycomb Dehumidifier SD-H

SD-H series honeycomb dehumidifiers are mainly used to dry hygroscopic engineering plastics. A honeycomb-rotor is used to offer effective drying, which under ideal conditions, can supply dehumidified dry air with a dew-point lower than -40℃.This series comprises 15 models of honeycomb dehumidifiers, the largest of which can provide dry air up to a quantity of 4,000 m3/hr.

Honeycomb Dehumidifier SD-H
Meet Shini auxiliary equipment - SD-H

Enquire

Dehumidifying Dryer SDD-U
Dehumidifying Dryer SDD-U

SDD series dehumidifying dryers combine dehumidifying and drying systems into a single unit. They have many applications in processing plastic materials, such as PA, PC, PBT, PET etc. All models feature SD-H honeycomb dehumidifiers with built-in process heater and insulated drying hopper. Under ideal conditions, it can provide dehumidified dry air with a dew-point lower than -40℃.

Dehumidifying Dryer SDD-U
Meet Shini auxiliary equipment - SDD-U

Enquire

Pet crystallier SCR
Pet crystallier SCR

SCR closed-loop crystallizers are used for constant crystallization of un-crystallized PET regrinds or pellets. Processed materials can then be dried and dehumidified directly. Crystallized materials can be conveyed to material storage bin or into drying hopper.

Pet crystallier SCR

Enquire

Mould Sweat Dehumidifiers SMD-H
Mould Sweat Dehumidifiers SMD-H

SMD series mould sweat dehumidifiers are designed to remove the moisture sweat from condensing on the mould surface. Forming of moisture sweat on the mould surface is due to the use of chilled water for reducing the moulding cycle time, particularly while moulding of the PET preforms. This series of machine uses honeycomb rotor to carry out dehumidifying function, which generates a dry airflow with dew point ranging from 0℃ to -10℃, and ensures the surrounding air of mould remaining in a low dew-point temperature. It provides constant low dew-point surrounding air to the mould surface all year round without being influenced by the change of seasons.

Mould Sweat Dehumidifiers SMD-H

Enquire

Smart Modular Dryer SSMD
Smart Modular Dryer SSMD

SSMD system consists of a dehumidifier equipped with a rotary molecular sieves, providing a continuous, very low dew point and modular dryers. SSMD series enables drying and dehumidifying of several materials at the same time with a minimum energy consumption.

Smart Modular Dryer SSMD
Meet Shini auxiliary equipment SSMD

Enquire