AGS Automation

EOAT systems

End of Arm Tool (EOAT) Kit PreciGrip

The PreciGrip End of Arm Tool (EOAT) Kit was developed from years of experience in a End of Arm Tooling (EOAT / Gripper) construction. The Target here is to build up the EOAT / Gripper as possible in a 90 degree orientation with the gripper components and make only the active element such as the vacuum cups, the sprue gripper or gripper finger adjustable. All components from the standard EOAT / Gripper System are compatible.

  • No nut is necessary
  • High stiffness
  • Subsequent add components at any time
  • Only one tool required
  • 90 degree orientation
EOAT Quick Change System
End of Arm Tool Quick Change systems with Dovetail purely mechanically, round semi-automatic with air -. Clutch and electrics. All systems are made for Prismclamping.
5 different Prismprofile. Serie P13 and P22
Profile Accessories
From Endcaps to extra long clamps
Profile Connetioncs
From 90 Connectors up 2 to 360° Connectors adjustable.
Clamps with Roundclamping,prism clamp, and of course withball joint.
Gripperatm for Vacuumcups
Gripperarm spring loaded also non rotating
Gripperarms for Function Elements
Gripper arms with different heads to replace. Simple and Inexpensive.
Vacuum Cups
Vacumm Cups from oval to round, from 1 Bellow up to 3 Bellows, from Silcon over Nitril to Polyurethane
Sprue Gripper
Different types of grippers. From8mm to 32mm piston. All with Roundclamping and of course with Prismclamping.
Gripper Finger

Greiffinger mit 16mm und 26mm kolben, mit unterschiedlichen Fingerformen, mit Abfrage und Prismenklemmung.
Gripper fingers with piston 16mmand 26mm, with different fingershapes, with query andPrismenklemmung.

Special Elements
Stroke units via prism combined with each other. Needle grippersdouble stroke also in connectionwith prisms.
Air - Vacuum Manifolds
Compressed air connectors with 1 input and 2 outputs or 2 inputs up to 16 outlets


AGS Catalog

Siųsti užklausą